Wood materials

Optimize your projects with our products

With our high-quality wood-based materials, your idea will turn into real construction projects in no time. In recent years, we have continuously expanded and supplemented our range for the benefit of our customers. Because we want you to be able to optimize each of your projects through our products and our experience. Benefit from our extraordinary expertise and a broad range of knowledge on the subject of wood-based materials.

We are also happy to advise you personally!

Our product line

From board to coil - wood that holds up

Silkscreen panels

We have screen printing plates made of birch and softwood in different thicknesses available. Screen printing plates can be used individually and are therefore used in many areas. Thus, they are often used as a carrier material for trailers, flooring or stages, for example. However, screen printing plates are also used for interior and exterior finishing, for partition walls, doors or wall and ceiling cladding. Due to their strong pressing and coating, they are weatherproof and highly resistant to all weather conditions.

  • Thicknesses from 6.5 mm to 30 mm
  • Free choice of formats
OSB & Chipboard

These types of panels are universally applicable. The building material is particularly popular for roof, wall and ceiling structures. But also for the construction of furniture OSB board is ideal.

.

Whether for load-bearing purposes in timber construction, furniture construction, interior finishing or as a packaging material - OSB board is a much-used material. We have all major thicknesses of this finishing board in stock or available for delivery at short notice for you.

  • Thickness from 9 mm to 30 mm
Glued laminated timber

If it has to be really stable, then our industrially manufactured glulam (also BS wood or BSH) is just right for you. Due to the strength grading of the starting material from the outside to the inside and the homogenization through its layered structure, it is up to 80% more load-bearing than usual construction timber and also dimensionally stable and crack-minimized. In addition to simple, straight components, it is possible to use it to produce shapes with variable cross-sections and/or simple curvature. Double-curved and twisted components are also possible.

  • Free choice of formats
Sheet piles

For finishing work, sheet pile boards or also rough sheet pile boards are particularly suitable. These can be quickly installed by a tongue and groove connection. To ensure high quality and durability, we only use material from Nordic spruce / fir or Siberian larch. The special feature of these woods is that they are robust, durable, dry quickly and are therefore a particularly slip-resistant floor covering. Outdoors, sheet piling is suitable for boarding up walls, roofs and floors, and indoors for wall and ceiling boarding of any kind.

Profile boards

Our profile boards are tongue and groove boards made of Siberian larch in A quality with chamfered edge on the visible side. Cleanly planed from all sides, fluted on both sides (smooth and fine), dried to 18% (+-2%), you get the boards untreated. Our profiled boards have durable strength and natural resistance to fungal and insect attack. The high resin content acts as a natural wood protector. Siberian larch is the hardest softwood and is specified according to DIN EN 350-2 with durability class 2-3.

  • Thickness: 20mm x width 95mm
  • Cover width: approx. 85mm
  • Available in: 2m, 3m, 4m length
  • For 1 sqm you need about 12 running meters of tongue and groove boards
Piles & Palisades

Piles and palisades are very popular due to their wide range of applications and are most often used for the manufacture of fences, playgrounds, gazebos, sandboxes, etc.. Even without impregnation, the timbers have a service life of up to 50 years, are suitable for outdoor processing and also have an extremely high resistance to fungi and insects. Our stakes and palisades are made of one-year-old Belarusian pine or spruce, either raw, untreated or treated with Sinesto B or technically dried.

  • Cylindrically milled piles
    With or without bevel as well as tip
    Diameter of 4-20 cm
    Length of 30-600 cm
  • White peeled piles
    With or without bevel as well as tip
    Diameter 4-13 cm
    Length of 100-600 cm
  • Roundwood
    Diameter of 5-14 cm.
    In all lengths
    Pine wood (min. 45 years old)
    Natural compensation of temperature and humidity fluctuations
    Resistant to external influences
    Long life due to moisture regulation
    Protection against mold with an economical and environmentally friendly process.
  • Half round timbers
    With or without chamfer
    Diameter of 5-20 cm
    Length 30-600 cm
Wooden spools

As one among a few suppliers, Holz Schäfer can offer you various products in the category of Wooden Coils.

More info

 

  • Cable spools
    Whether made of wood or plywood, as a disposable or reusable spool, with our cable drums you save money, space and protect the environment.
  • Disposable spools
    Our disposable spools made of plywood you can order with different bandwidth, because the flange diameter is from 250 mm to 1,500 mm. The components from our standard program can be individually combined with each other.
  • Special spools
    In the realization of customized special designs for industrial use is our great strength. Whether special bores, multi-chamber coils or printing, there are virtually no limits to your wishes.
  • Refill coils
    For repeated use, we manufacture coils in a stable reusable version. On request, we supply these in a demountable screw version, so that individual components can be renewed without having to dispose of the complete coil. So you save costs, resources and the environment.
Traverbars

Part of our range of wood-based materials also includes traver strips for the furniture and kitchen industry, DIY stores, the sanitary trade and private households.

These find their use mainly in kitchens in bathrooms and serve as reinforcement for back walls.

More info

  • Die Ummantelung erfolgt mit PVC, PP oder Papier-Folien
  • Der Kunde hat die Wahl zwischen verschiedenen Stärken und Längen
  • Folienummantelt aus MDF oder Spanplatte
  • Melaminbeschichtet aus Spanplatten oder MDF
  • Massivholztraversen
Silkscreen panels

We have screen printing plates made of birch and softwood in different thicknesses available. Screen printing plates can be used individually and are therefore used in many areas. Thus, they are often used as a carrier material for trailers, flooring or stages, for example. However, screen printing plates are also used for interior and exterior finishing, for partition walls, doors or wall and ceiling cladding. Due to their strong pressing and coating, they are weatherproof and highly resistant to all weather conditions.

  • Thicknesses from 6.5 mm to 30 mm
  • Free choice of formats
OSB & Chipboard

These types of panels are universally applicable. The building material is particularly popular for roof, wall and ceiling structures. But also for the construction of furniture OSB board is ideal.

.

Whether for load-bearing purposes in timber construction, furniture construction, interior finishing or as a packaging material - OSB board is a much-used material. We have all major thicknesses of this finishing board in stock or available for delivery at short notice for you.

  • Thickness from 9 mm to 30 mm
Glued laminated timber

If it has to be really stable, then our industrially manufactured glulam (also BS wood or BSH) is just right for you. Due to the strength grading of the starting material from the outside to the inside and the homogenization through its layered structure, it is up to 80% more load-bearing than usual construction timber and also dimensionally stable and crack-minimized. In addition to simple, straight components, it is possible to use it to produce shapes with variable cross-sections and/or simple curvature. Double-curved and twisted components are also possible.

  • Free choice of formats
Sheet piles

For finishing work, sheet pile boards or also rough sheet pile boards are particularly suitable. These can be quickly installed by a tongue and groove connection. To ensure high quality and durability, we only use material from Nordic spruce / fir or Siberian larch. The special feature of these woods is that they are robust, durable, dry quickly and are therefore a particularly slip-resistant floor covering. Outdoors, sheet piling is suitable for boarding up walls, roofs and floors, and indoors for wall and ceiling boarding of any kind.

Profile boards

Our profile boards are tongue and groove boards made of Siberian larch in A quality with chamfered edge on the visible side. Cleanly planed from all sides, fluted on both sides (smooth and fine), dried to 18% (+-2%), you get the boards untreated. Our profiled boards have durable strength and natural resistance to fungal and insect attack. The high resin content acts as a natural wood protector. Siberian larch is the hardest softwood and is specified according to DIN EN 350-2 with durability class 2-3.

  • Thickness: 20mm x width 95mm
  • Cover width: approx. 85mm
  • Available in: 2m, 3m, 4m length
  • For 1 sqm you need about 12 running meters of tongue and groove boards
Piles & Palisades

Piles and palisades are very popular due to their wide range of applications and are most often used for the manufacture of fences, playgrounds, gazebos, sandboxes, etc.. Even without impregnation, the timbers have a service life of up to 50 years, are suitable for outdoor processing and also have an extremely high resistance to fungi and insects. Our stakes and palisades are made of one-year-old Belarusian pine or spruce, either raw, untreated or treated with Sinesto B or technically dried.

  • Cylindrically milled piles
    With or without bevel as well as tip
    Diameter of 4-20 cm
    Length of 30-600 cm
  • White peeled piles
    With or without bevel as well as tip
    Diameter 4-13 cm
    Length of 100-600 cm
  • Roundwood
    Diameter of 5-14 cm.
    In all lengths
    Pine wood (min. 45 years old)
    Natural compensation of temperature and humidity fluctuations
    Resistant to external influences
    Long life due to moisture regulation
    Protection against mold with an economical and environmentally friendly process.
  • Half round timbers
    With or without chamfer
    Diameter of 5-20 cm
    Length 30-600 cm
Wooden spools

As one among a few suppliers, Holz Schäfer can offer you various products in the category of Wooden Coils.

More info

 

  • Cable spools
    Whether made of wood or plywood, as a disposable or reusable spool, with our cable drums you save money, space and protect the environment.
  • Disposable spools
    Our disposable spools made of plywood you can order with different bandwidth, because the flange diameter is from 250 mm to 1,500 mm. The components from our standard program can be individually combined with each other.
  • Special spools
    In the realization of customized special designs for industrial use is our great strength. Whether special bores, multi-chamber coils or printing, there are virtually no limits to your wishes.
  • Refill coils
    For repeated use, we manufacture coils in a stable reusable version. On request, we supply these in a demountable screw version, so that individual components can be renewed without having to dispose of the complete coil. So you save costs, resources and the environment.
Traverbars

Part of our range of wood-based materials also includes traver strips for the furniture and kitchen industry, DIY stores, the sanitary trade and private households.

These find their use mainly in kitchens in bathrooms and serve as reinforcement for back walls.

More info

  • Die Ummantelung erfolgt mit PVC, PP oder Papier-Folien
  • Der Kunde hat die Wahl zwischen verschiedenen Stärken und Längen
  • Folienummantelt aus MDF oder Spanplatte
  • Melaminbeschichtet aus Spanplatten oder MDF
  • Massivholztraversen
Silkscreen panels

We have screen printing plates made of birch and softwood in different thicknesses available. Screen printing plates can be used individually and are therefore used in many areas. Thus, they are often used as a carrier material for trailers, flooring or stages, for example. However, screen printing plates are also used for interior and exterior finishing, for partition walls, doors or wall and ceiling cladding. Due to their strong pressing and coating, they are weatherproof and highly resistant to all weather conditions.

  • Thicknesses from 6.5 mm to 30 mm
  • Free choice of formats
OSB & Chipboard

These types of panels are universally applicable. The building material is particularly popular for roof, wall and ceiling structures. But also for the construction of furniture OSB board is ideal.

.

Whether for load-bearing purposes in timber construction, furniture construction, interior finishing or as a packaging material - OSB board is a much-used material. We have all major thicknesses of this finishing board in stock or available for delivery at short notice for you.

  • Thickness from 9 mm to 30 mm
Glued laminated timber

If it has to be really stable, then our industrially manufactured glulam (also BS wood or BSH) is just right for you. Due to the strength grading of the starting material from the outside to the inside and the homogenization through its layered structure, it is up to 80% more load-bearing than usual construction timber and also dimensionally stable and crack-minimized. In addition to simple, straight components, it is possible to use it to produce shapes with variable cross-sections and/or simple curvature. Double-curved and twisted components are also possible.

  • Free choice of formats
Sheet piles

For finishing work, sheet pile boards or also rough sheet pile boards are particularly suitable. These can be quickly installed by a tongue and groove connection. To ensure high quality and durability, we only use material from Nordic spruce / fir or Siberian larch. The special feature of these woods is that they are robust, durable, dry quickly and are therefore a particularly slip-resistant floor covering. Outdoors, sheet piling is suitable for boarding up walls, roofs and floors, and indoors for wall and ceiling boarding of any kind.

Profile boards

Our profile boards are tongue and groove boards made of Siberian larch in A quality with chamfered edge on the visible side. Cleanly planed from all sides, fluted on both sides (smooth and fine), dried to 18% (+-2%), you get the boards untreated. Our profiled boards have durable strength and natural resistance to fungal and insect attack. The high resin content acts as a natural wood protector. Siberian larch is the hardest softwood and is specified according to DIN EN 350-2 with durability class 2-3.

  • Thickness: 20mm x width 95mm
  • Cover width: approx. 85mm
  • Available in: 2m, 3m, 4m length
  • For 1 sqm you need about 12 running meters of tongue and groove boards
Piles & Palisades

Piles and palisades are very popular due to their wide range of applications and are most often used for the manufacture of fences, playgrounds, gazebos, sandboxes, etc.. Even without impregnation, the timbers have a service life of up to 50 years, are suitable for outdoor processing and also have an extremely high resistance to fungi and insects. Our stakes and palisades are made of one-year-old Belarusian pine or spruce, either raw, untreated or treated with Sinesto B or technically dried.

  • Cylindrically milled piles
    With or without bevel as well as tip
    Diameter of 4-20 cm
    Length of 30-600 cm
  • White peeled piles
    With or without bevel as well as tip
    Diameter 4-13 cm
    Length of 100-600 cm
  • Roundwood
    Diameter of 5-14 cm.
    In all lengths
    Pine wood (min. 45 years old)
    Natural compensation of temperature and humidity fluctuations
    Resistant to external influences
    Long life due to moisture regulation
    Protection against mold with an economical and environmentally friendly process.
  • Half round timbers
    With or without chamfer
    Diameter of 5-20 cm
    Length 30-600 cm
Wooden spools

As one among a few suppliers, Holz Schäfer can offer you various products in the category of Wooden Coils.

More info

 

  • Cable spools
    Whether made of wood or plywood, as a disposable or reusable spool, with our cable drums you save money, space and protect the environment.
  • Disposable spools
    Our disposable spools made of plywood you can order with different bandwidth, because the flange diameter is from 250 mm to 1,500 mm. The components from our standard program can be individually combined with each other.
  • Special spools
    In the realization of customized special designs for industrial use is our great strength. Whether special bores, multi-chamber coils or printing, there are virtually no limits to your wishes.
  • Refill coils
    For repeated use, we manufacture coils in a stable reusable version. On request, we supply these in a demountable screw version, so that individual components can be renewed without having to dispose of the complete coil. So you save costs, resources and the environment.
Traverbars

Part of our range of wood-based materials also includes traver strips for the furniture and kitchen industry, DIY stores, the sanitary trade and private households.

These find their use mainly in kitchens in bathrooms and serve as reinforcement for back walls.

More info

  • Die Ummantelung erfolgt mit PVC, PP oder Papier-Folien
  • Der Kunde hat die Wahl zwischen verschiedenen Stärken und Längen
  • Folienummantelt aus MDF oder Spanplatte
  • Melaminbeschichtet aus Spanplatten oder MDF
  • Massivholztraversen
Consulting / Project procedure

With us you don't buy products, but optimised solutions tailored to your needs. Together we analyse and realise your transport or construction project.

more info